Страница 1 из 1

Alu sheet cutting and engraving.

СообщениеДобавлено: 02 июл 2016, 16:06
markchapman289
Hi.
I've looked though several examples and the various menu options of gcodetools (1.7) on inkscape(0.91) but cant find the tool width and multi-pass option. The setting screens are not the same as displayed in the forum.

I am attempting two things:
1. cut a alu alloy sheet which requires multiple passes to get through the thickness and
2. to engrave and alu allow sheet

Thanks.