Mirroring to engrave both side of material

cnc-club.ru for English speaking users

Re: Mirroring to engrave both side of material

Сообщение James628 » 31 янв 2013, 20:19

BINGO!

And big sorry !

I forgot to put the "gcodetools-dev.py" to the extension directory.

Thank you so much for your time and effort Nick!

I have to document the process of making a wooden toy. It's a great chance to do it with Gcodetools.
So I will show you this "manual" in Hungarian language.

Thanks again!
James628
Новичок
 
Сообщения: 28
Зарегистрирован: 19 июн 2012, 19:55
Репутация: 0

Re: Mirroring to engrave both side of material

Сообщение Nick » 01 фев 2013, 09:53

And what's about gcodetools-dev.py is it there too?

------------
Aha! you've already found that :)

PS If you write a manual it will be great!
Notify me when it will be ready, I'll put a link to it in Gcodetools description page.
Use the Console, Luke.
Аватара пользователя
Nick
Мастер
 
Сообщения: 22330
Зарегистрирован: 23 ноя 2009, 16:45
Откуда: Gatchina, Saint-Petersburg distr., Russia
Репутация: 1332
Заслуга: Developer
Медальки:

Re: Mirroring to engrave both side of material

Сообщение James628 » 01 фев 2013, 13:38

Hi,

I think I found something not correctly working:
When "Parametrize Gcode" is selected as post-processor AND flip(x) as additional post-processor, then the produced Gcode is not correct.
You can test: draw few circles, make Gcode with no post-processor but use flip(x), and the very same but select "Parametrize Gcode" for postproc.

Take a look at the procduced Gcode: in parametrized flipped code, the G02/G03 and their I/J parameters are not set correctly to minus value.
I did not tried with other transformation or other axes, but the same issue is in stable and dev version.

Regards:
James
James628
Новичок
 
Сообщения: 28
Зарегистрирован: 19 июн 2012, 19:55
Репутация: 0

Re: Mirroring to engrave both side of material

Сообщение Nick » 01 фев 2013, 14:49

Parameterize is a quite specific funtion... In what order do you apply postprocessors? flip first, and parameterize after?
Use the Console, Luke.
Аватара пользователя
Nick
Мастер
 
Сообщения: 22330
Зарегистрирован: 23 ноя 2009, 16:45
Откуда: Gatchina, Saint-Petersburg distr., Russia
Репутация: 1332
Заслуга: Developer
Медальки:

Re: Mirroring to engrave both side of material

Сообщение James628 » 01 фев 2013, 15:19

Nick писал(а):Parameterize is a quite specific funtion... In what order do you apply postprocessors? flip first, and parameterize after?


I do it this way:
Вложения
Mirroring to engrave both side of material gc3.png
James628
Новичок
 
Сообщения: 28
Зарегистрирован: 19 июн 2012, 19:55
Репутация: 0

Re: Mirroring to engrave both side of material

Сообщение Nick » 04 фев 2013, 16:53

Hmmm... I do not remember how are they applied...
try using them both as additional post-processor:
flip(x); parameterize();
Use the Console, Luke.
Аватара пользователя
Nick
Мастер
 
Сообщения: 22330
Зарегистрирован: 23 ноя 2009, 16:45
Откуда: Gatchina, Saint-Petersburg distr., Russia
Репутация: 1332
Заслуга: Developer
Медальки:

Re: Mirroring to engrave both side of material

Сообщение James628 » 13 фев 2013, 20:20

Hi Nick,

When I use both of them as additional post-proc then it works. Thanks.
I sent you a PM. Would you have time to look at it?

Regards:
James
James628
Новичок
 
Сообщения: 28
Зарегистрирован: 19 июн 2012, 19:55
Репутация: 0

Пред.

Вернуться в English forum

Кто сейчас на конференции

Зарегистрированные пользователи: aftaev, Alex lamaka, Alex_C, alexx.bit, Anatolie, Bing [Bot], error101, gendos, Google [Bot], Google Feedfetcher, grek, Igor26rus, jimgood, krab13, Lebede, leprud, Montis, MX_Master, niksooon, Nixon, NKS, odekolon, sivolap36, sorter, SovietTwins, timo13, tooshka, tronhejm, ukr-sasha, vektor_z, xvovanx, Yahoo [Bot], Yandex [bot], Владимир_36

Поделиться

Reputation System ©'