engraving multiple layers

cnc-club.ru for English speaking users

engraving multiple layers

Сообщение tecdroid » 16 сен 2014, 10:50

Hi,

now that I got my first test project done I'd like to get a bit more ambitious, also concerning to material. Therefore, i'd like not to mill the whole thing at once but in several layers. Is there any way to do this with gcodetools?
tecdroid
Новичок
 
Сообщения: 25
Зарегистрирован: 18 июн 2014, 13:35
Репутация: 1

Re: engraving multiple layers

Сообщение narvf » 17 сен 2014, 11:32

Can you explain more what would you like to do?

Example file with two layers is here:
[url]
http://e-rr.pl/cnc/files/wyciecie_oraz_grawer.svg[/url]

Is this what you were asking?
narvf
Кандидат
 
Сообщения: 60
Зарегистрирован: 22 июл 2014, 11:39
Репутация: 4

Re: engraving multiple layers

Сообщение tecdroid » 17 сен 2014, 13:56

I just don't want to mill 6mm depth at once but maybe going over my path three times, 2mm depth each..
tecdroid
Новичок
 
Сообщения: 25
Зарегистрирован: 18 июн 2014, 13:35
Репутация: 1

Re: engraving multiple layers

Сообщение narvf » 17 сен 2014, 14:40

So if you set for example z-Depth (when adding orientation points) to -6mm, now you have to set "depth step" to "2" in tool options i.e. in this greeen recatangle on tool that you added. This will make 3 passess each for 2 mm. Hope that helps
narvf
Кандидат
 
Сообщения: 60
Зарегистрирован: 22 июл 2014, 11:39
Репутация: 4


Вернуться в English forum

Кто сейчас на конференции

Зарегистрированные пользователи: anthro, Bing [Bot], FedorovDrugoy, Google [Bot], Heify, Majestic-12 [Bot], migrat, sas_75, SDAMASK, Yahoo [Bot], Yandex [bot], Фрост, Тенгель

Поделиться

Reputation System ©'